IMEI Repair via Pandora Tool or DFT Tool

Smartphones are an important part of our daily lives. But sometimes, they stop working due to different software or hardware issues. One of the most serious issues is a dead boot problem. In this article, we will discuss what dead boot means, why it happens, and how you can fix it on the Realme 10 RMX3630 using Scatter Firmware.

Realme 10 RMX3630 Dead Boot Repair Fix ROM

What is a Dead Boot Issue?


A dead boot issue means your phone is completely dead. It won’t turn on, it won’t charge, and your computer won’t detect it. It looks like the phone has no life at all.

You may experience dead boot after:

  • Flashing wrong firmware
  • Interrupted flashing process
  • Power failure during update
  • Corrupt bootloader or preloader
  • Using incompatible tools
  • About Realme 10 RMX3630

Realme 10 RMX3630 is a popular budget smartphone with the following features:

  • MediaTek Helio G99 chipset
  • Android 12/13 based Realme UI
  • 4GB/6GB RAM and 64GB/128GB storage
  • 5000 mAh battery

Since it has a MediaTek processor, we can use SP Flash Tool and Scatter Firmware to fix most software problems, including dead boot.

What is Scatter Firmware?


Scatter Firmware is a special type of software file used for MediaTek phones. It includes a “scatter.txt” file that contains all information about partitions like:

  • Preloader
  • Boot
  • System
  • Recovery
  • Vendor

These files are loaded into SP Flash Tool or any MTK flash tool to flash the phone.
Scatter firmware is required when fixing a dead boot, unbricking, or restoring a phone.

Required Tools and Files:


To repair dead boot on Realme 10 RMX3630, you will need:

1. Realme 10 RMX3630 Scatter Firmware

  • This is the main file that contains the correct ROM to fix the phone.
  • Make sure it is for your exact model RMX3630.

2. SP Flash Tool

  • A free flashing tool for MediaTek devices.
  • Used to load scatter firmware and flash it to your phone.

3. MediaTek USB Drivers

  • Allows your computer to detect and communicate with the phone.

4. Dead Boot Test Point (Optional)

  • If the phone is not detected normally, you may need to use a test point to force it into preloader mode.

5. USB Cable and Windows PC

  • Use a good-quality USB cable.
  • Works best on Windows 7/10/11.

Step-by-Step: How to Fix Dead Boot on Realme 10 RMX3630


Step 1: Install MTK USB Drivers

  • Download the MediaTek USB drivers.
  • Run the installer and complete installation.
  • Restart your computer to apply changes.

Step 2: Download and Extract Scatter Firmware

  • Download the official Realme 10 RMX3630 Scatter Firmware.
  • Extract the .zip or .rar file using WinRAR or 7-Zip.
  • Make sure the folder contains a file named MTxxxx_Android_scatter.txt.

Step 3: Download and Run SP Flash Tool

  • Download the latest version of SP Flash Tool.
  • Extract and run flash_tool.exe as administrator.

Step 4: Load the Scatter File


  • In SP Flash Tool, click “Choose” next to “Scatter-loading File.”
  • Select the scatter.txt file from the firmware folder.
  • All partitions will load automatically.

Step 5: Select "Download Only" Mode

  • From the drop-down, choose Download Only.
  • Do not choose Format+Download unless needed.

Step 6: Start Flashing Process

Click the Download button (green arrow).
  • Now turn off your phone completely.
  • Connect it to the PC using a USB cable.

If the phone is not detected:

  • You may need to short the test point.
  • Use tweezers to short test point and plug in the cable.

Step 7: Wait for Flashing to Finish

  • If successful, you will see a green tick or “Download OK” message.
  • Flashing usually takes 3 to 10 minutes.

📥 Download Dead Boot Repair Fix ROM

Google Drive

🔐 Password: HALABTECH2024

What If SP Flash Tool Doesn’t Detect the Phone?


If the phone is not detected at all, even after installing drivers, try these:

  • Use another USB cable or port.
  • Try shorting the test point (search Google for RMX3630 test point image).
  • Use a different PC.
  • Make sure battery has at least some charge.
  • Try firmware upgrade mode in SP Flash Tool.

Precautions Before Flashing:


  • Backup Important Data: All data will be erased.
  • Right Firmware: Always use firmware for your exact model (RMX3630).
  • Battery Charge: Make sure your battery is above 30%.
  • Don’t Interrupt Process: Don’t disconnect cable or power during flashing.
  • Disable Antivirus Temporarily: Some antivirus may block flashing tools.

After Flashing: What to Expect


Once flashing is done and your phone turns on:

  • It may take a few minutes to boot up for the first time.
  • Setup your phone as new.
  • Check if Wi-Fi, camera, and other features work properly.

If the phone still does not turn on, you may need to:

  • Try another version of the firmware.
  • Use a different flash tool like CM2, MCT, or UMT.
  • Check for hardware damage.

Tips to Avoid Dead Boot in Future:


  • Don’t flash the wrong firmware or custom ROM.
  • Avoid flashing when battery is low.
  • Don’t unplug cable during firmware updates.
  • Use official tools whenever possible.
  • Enable USB debugging and OEM unlock if rooting.

Conclusion:


Fixing a dead boot on Realme 10 RMX3630 can look difficult, but with the right tools and firmware, it’s possible to bring your phone back to life.

The most important thing is to use the correct Scatter Firmware and follow each step carefully. SP Flash Tool is a trusted solution for MediaTek phones, and it works well for dead boot repair.

If you follow the guide properly, your phone should turn on and work like new again.